KranK StreetSeries Bushings Kit w/Indy Pivot Cups

$87.00 $65.00
You save $22.00
Current Stock:
Availability:
Ships within 24 hours!

Never used anything other than Cones & Barrels in your Street Set-up?  Wondering what our KranK Formula is all about?  This complete kit lets you try one pair of every shape we offer in our Krank Street Series at a special discounted price.  You get:

  • Your choice of durometer of every shape available in the new KranK Formula StreetSeries
  • 7 pairs of bushings, with washers & stickers
  • Indy Pivot Cups
  • Plastic lidded box for easy storage

Choose:

  • 1 pair ShortStreetCones (RS)
  • 1 pair StreetCones (BS)
  • 1 pair ShortStreetBarrels (RS)
  • 1 pair Street Barrels (BS)
  • 1 pair StreetFatCones (BS)
  • 1 pair StreetMagnums (BS)
  • 1 pair StreetChubbys (BS)
  • 1 pair of Indy 96a WFB pivot cups
  • 7"W x 3.75"L x 1.375"H Plastic yellow box with dividers
  • Your choice of durometers for all bushings 
  • An $87.00 value for $65.00 

Our highest rebound formula to date, KranK is designed specifically to change under pressure and is controlled by the amount of clamp pressure you subject it to when tightening the King Pin nut!  The effective range of control is from barely snug for the loosest feel to 2 full turns for the tightest feel.  KranK will turn the same or less than the same durometer of other brands which is also a departure from our APS and WFB formulas. 

The RipTide Street -Series of bushings, for traditional kingpin trucks, was born from the desire to bring new levels of performance and innovation to skateboarding.  Here at RipTide, we believe that to achieve your goals in skating, you need to have a high level of control over your equipment.  If your setup performs the way you want it to, you have a much better chance of doing what you want to do - whether that means landing a seemingly impossible trick, controlling a massive drop at high speeds, dealing with rough roads, eliminating wheelbite, executing fluid moves during a vert session or pumping mad lines in the bowl.  Up until now, the rule has been to only use cones and barrels and...... 

RipTide says “No More Rules…this is Skateboarding”.  

In addition to offering the two traditional roadside shapes, our ShortStreetCone and the ShortStreetBarrel, we offer five boardside shapes.  They include the StreetCone, StreetBarrel, StreetFatCone, StreetMagnum and the StreetChubby.  

BUSHING SHAPES FROM THE LOWEST TO THE HIGHEST STABILITY: 

ShortStreet & StreetCones:  Offer the lowest resistance and stability of the shapes addressed here and can allow your trucks to easily achieve their full lean and turn. 

 ShortStreet & StreetBarrels:  Barrels offer the next step up in stability above the Cones and are often used for a broad range of skating disciplines depending on the skaters skill level and personal preference.  

StreetFatCones:  FatCones have the same initial stability as a Barrel but as you lean, they offer progressively higher resistance the further you go.  

StreetMagnum:  High linear stability for poorly defined bushing seats.  They still turn very well and can be used in a softer duro if you are looking for a stable yet plush and comfortable setup.  

StreetChubbys:  Chubbys offer the highest stability of all the shapes discussed here and work best in a truck that has a stepped bushing seat to take advantage of the secondary step in the bushing, the vertical side wall and Chubbys large backside.  They still turn very well and can be used in a softer duro if you are looking for a stable yet plush and comfortable setup.  The Chubby is one of our most versatile bushings because of its size, shape and wide applications.  

Street Series Setups: 

The ShortStreetCone / StreetCone setup is for those looking for a very carvy or surfy feel.  

The ShortStreetCone / StreetBarrel setup is for those looking for a carvy or surfy feel but with a bit more stability.  With this choice the resistance is more constant or linear throughout the range of motion.  

The ShortStreetBarrel / StreetBarrel setup is for those looking for higher stability at higher speeds but still highly maneuverable. 

 The ShortStreetBarrel / StreetFatCone setup is for those looking for higher stability at higher speeds but still highly maneuverable.  This setup is ideal when you need to restrict the ends of the lean to prevent wheelbite or if you just like a more progressive feel to your setup. 

 The ShortStreetBarrel / StreetMagnum is our go to set up for most high speed applications in trucks with open bushing seats.  Used for high speed applications due to its high stability and versatility.  

The ShortStreetBarrel / StreetChubby is our go to set up for most high speed applications in trucks with more restrictive or stepped bushing seats due to the high stability and versatility this particular combo offers. 

Have Questions?  Need more info?  

Check out our Weight Application ChartsTruck Application Charts e-mail us tracey@riptidesports.com or call us at 805-280-5486 - we're super friendly folks who enjoy helping you choose the bushings combo that is just right for you!