KranK StreetCone Duro Choices

$9.00
Current Stock:

Durometer required

Sold as Pair with Small Cupped Washers and a Sticker.  

.975" Dia x .50" High (24.77mm Dia x 12.70mm High)

Street Cones offer the lowest resistance and stability of the 5 shapes we offer, and can allow your trucks to easily achieve their full lean and turn. 

The ShortStreetCone / StreetCone setup is for those looking for a very carvy, surfy feel, is super fun and allows you good control while mastering tricks.

  • Harder KranK durometer bushings (93a) are for heavier-weight riders (over 140lbs) as harder durometer bushings allow for a nice tight set-up
  • Softer KranK durometer bushings (87a) are best for lightweight riders (up to 140lbs) as well as for those looking for a looser setup in the RoadSide position when coupled with a harder duro bushing.

PLEASE NOTE:  The KranK Formula has quite a bit of adjustability - so order accordingly!  You can tighten the kingpin nut up to two full turns to 'harden' or 'loosen' the duro.

  • Stiffer bushings will result in a more resistant board, which can be an advantage when performing tricks - medium weight riders may benefit from mixing duro's roadside & boardside.  (See guide links below)
  • The StreetCone offers wicked turnability
  • Pair with  ShortStreetCones or ShortStreetBarrels - ideal for carving, freestyle & tricks
  • Mix duro's &/or shapes to custom-fit your style.  Check out our Info Guides for help:

 Bushings Shapes Info Guide         Street Series Info & Setups