Frequently bought together:
Description
Sold as Pair, with large cupped washers & a sticker
A Custom Run of the APS StreetBarrels has left some over in the nicely soft APS 75a - quite a bit softer than the 85a which is the lowest duro in our current line-up. Fun to try, excellent for light-weight riders - be sure to WATCH OUT for wheelbite when using this duro!
- Sized to fit properly in conventional "Indy-style" trucks
- Custom APS Urethane Formula for ultra-performance and sweet rebound.
- .975" Dia x .5" High (24.77mm Dia x 12.7mm High)
- E-mail tracey@riptidesports.com for help fine-tuning your setup
- Ideal for carving, freestyle & tricks!
- Mix duro's &/or shapes to custom-fit your style. Check out our Info Guides for help.
Related Products


APS Short Street Barrel
MSRP:
Now:
$7.00
Was:
Sold as Pair, with small flat washers & a sticker
Sized to fit properly in conventional "Indy-style" trucks
Custom APS Urethane Formula for ultra-performance and sweet rebound
.975" Dia...

APS Street Barrel
MSRP:
Now:
$7.00
Was:
Street Barrel skateboard bushings are sold as a PAIR with a sticker and LARGE CUP WASHERS are included:
Sized to fit properly in conventional "Indy style" trucks
Custom APS Urethane Formula...

APS Street Chubby
MSRP:
Now:
$8.50
Was:
Street Chubby skateboard bushings are sold as a PAIR with a sticker and LARGE FLAT WASHERS are included:
Sized to fit properly in conventional "Indy style" trucks
Custom APS Urethane...

APS Street FatCone
MSRP:
Now:
$8.50
Was:
Street FatCone skateboard bushings are sold as a PAIR with a sticker and LARGE CUP WASHERS are included:
Sized to fit properly in conventional "Indy style" trucks
Custom...

APS Street Magnum
MSRP:
Now:
$8.50
Was:
Sold as Pair, with large flat washers & a sticker
Sized to fit properly in conventional "Indy-style" trucks
Custom APS Urethane Formula for ultra-performance and sweet rebound
1.0" Dia x .5"...
Customers Also Viewed


APS Barrel
MSRP:
Now:
$7.00
Was:
Barrel skateboard bushings are sold as a PAIR with a sticker and NO WASHERS are included:
The APS formula rides a couple of points softer than they test, so order...


Dual Kingpin Board Bushing Box
MSRP:
$84.50
Now:
$69.99
Was:
This kit is designed for electric skateboards that use dual kingpin trucks.
For simplicity, I will refer to the bushing positions from Board-Side to Road-Side. So for the front, Front 1 is the...


Large Cup Washers
MSRP:
Now:
$1.50
Was:
Packaged with a Sticker - Available in Packs of 4, 8, 16 or 32 Washers
A large Plated-Steel Cupped Washer commonly used with Street Barrel Bushings
Specs: .390" Hole x 1.12"...


KranK Barrel
MSRP:
Now:
$9.00
Was:
Performance Under Pressure
Sold as Pair with a Sticker
.975" Dia x .60" High (24.8mm Dia x 15.24mm High)
Harder KranK durometer bushings (96a & 93a) are for heavier-weight riders (over...

KORE Spherical Bushings - APS, WFB & KranK
MSRP:
Now:
$9.95
Was:
Dimensions of the Kores: .8125" (20.63mm) OD x .373" (9.47mm) ID x .375" (9.53mm) H
Sold as Pair with a Sticker. (Enough for 1 pair of Trucks)
Spherical Bushings are used to replace...


Speed Lube
MSRP:
Now:
$9.80
Was:
Our Speed Lube for ball bearings comes in two formulas for any condition
Developing a bearing lube for skateboards has been on our agenda for a few years as we’ve never been completely...

Large Flat Washers
MSRP:
Now:
$1.50
Was:
Packaged with a Sticker & Available in Packs of 4, 8, 16 & 32
Large Stainless Steel Flat Washers commonly used with Street Chubby, Street FatCone, Street Magnum, Chubby, FatCone,...

APS FatCone
MSRP:
Now:
$8.50
Was:
FatCone skateboard bushings are sold as a PAIR with a sticker and LARGE FLAT WASHERS are included:
The APS formula rides a couple of points softer than they test, so order...

APS Tall Barrel
MSRP:
Now:
$8.00
Was:
Sold as Pair with Sticker.
.975" Dia x .75" High (24.77mm Dia x 19mm High)
APS rides a couple of points softer than they test, so order accordingly
Hard durometer bushings (95a -...

Small Flat Washers
MSRP:
Now:
$1.50
Was:
Packaged with a Sticker, available in Packs of 4, 8, 16 or 32
Small Stainless Steel Flat Washers commonly used with Short Street Barrel Bushings
Specs: .377" Hole x .875"...