Grizzly 5.01 & Later

APS Barrel Longboard Bushings are sold as a Pair with a sticker and No Washers are included. Bushing Height: 0.6" - Bushing Diameter: 0.98" The APS compound is very lively, which offers high rebound with lots of control and lean. This...

Krank Barrel Bushings are sold as a Pair or 2 Pairs with a sticker. No Washers are included and you may buy optional washers to further customize your setup. Bushing Height: 0.6" - Bushing Diameter: 0.98" Performance Under Pressure - The KranK...

Cone skateboard bushings are sold as a PAIR with a sticker and NO WASHERS are included:  The APS formula rides a couple of points softer than they test, so order accordingly Hard durometer bushings...

FatCone skateboard bushings are sold as a PAIR with a sticker and LARGE FLAT WASHERS are included:  The APS formula rides a couple of points softer than they test, so order accordingly Hard durometer bushings (95a - 97...

Sold as Pair with Sticker. .975" Dia x .60" High (24.77mm Dia x 15.24mm High) Cones offer the lowest resistance and stability of bushing shapes which can allow your trucks to easily achieve their full lean and turn. The Cone / Cone setup is for...

WFB Barrel Longboard Bushings are sold as a Pair with a sticker and No Washers are included. Bushing Height: 0.6" - Bushing Diameter: 0.98" The WFB formula will have a white powder residue on the surface. This is a good thing and...

Sold as Pair with Flat Washers and Sticker.   .975" Dia x .60" High (24.77mm Dia x 15.24mm High) FatCones have the same initial stability as a Barrel but as you lean, they offer progressively higher resistance the further you go.  The...

Chubby skateboard bushings are sold as a PAIR with a sticker and LARGE FLAT WASHERS are included:  The APS formula rides a couple of points softer than they test, so order accordingly Hard durometer bushings (95a -...

Sold as Pair with Large Flat Washers and a Sticker.   .975" Dia x .60" High (24.77mm Dia x 15.24mm High) Chubbys offer the highest stability of all the shapes we offer & work best in a truck that has a stepped bushing seat to take advantage...

Sold as Pair with Sticker.  .975" Dia x .60" High (24.77mm Dia x 15.24mm High) APS rides a couple of points softer than they test, so order accordingly Hard durometer bushings (95.5a - 93a) are for heavier-weight riders (over 125lbs)...

Sold as Pair with Large Flat Washers & a Sticker .975" Dia x .60" High (24.77mm Dia x 15.24mm High). WFB rides a couple of points softer than they test, so order accordingly   Hard durometer bushings (95.5a - 93a) are for...

Sold as Pair with Large Flat Washers & a Sticker .975" Dia x .60" High (24.77mm Dia x 15.24mm High) APS rides a couple of points softer than they test, so order accordingly Hard durometer bushings (95.5a - 93a) are for heavier-weight riders...

Check out Bear Grizzly Recommended Products for more info on the trucks.  WFB Ace Pivot Cups are sold as a pair and fit into Bear Grizzly 5.01 & Later. These pivots are available in Green. Riptide's Premium WFB Pivot Cups are a perfect upgrade...