Paris V3

Sold as a Pair with Sticker! Specifically designed for each truck Lively & Responsive Hand-poured into Custom-made molds, then the cup end is machined to fit the truck's base plate perfectly No machining imperfections and no heat-affected zone...

Our Speed Lube for ball bearings comes in two formulas for any condition Developing a bearing lube for skateboards has been on our agenda for a few years as we’ve never been completely satisfied with the lubes that were available. When we got...

Never used anything other than Cones & Barrels in your Street Set-up?  Wondering what our KranK Formula is all about?  This complete kit lets you try one pair of every shape we offer in our Krank Street Series at a special discounted price...

Sold as Pair with Large Flat Washers and a Sticker.   The Street Chubby provides a more stable platform when combined with either a Barrel or a Cone shaped Bushing.  If you're looking for more control while learning, or are simply...

Sold as Pair with Large Flat Washers and Sticker.  Choose the Street FatCone when you're looking for a little higher resistance in lean than the Street Barrel will offer you!  The FatCone shape will offer a little more stability in your axle...

Sold as Pair with Small Cupped Washers and a Sticker.   .975" Dia x .50" High (24.77mm Dia x 12.70mm High) Street Cones offer the lowest resistance and stability of the 5 shapes we offer, and can allow your trucks to easily achieve their full...

Sold as Pair with Large Cupped Washers and Sticker.   .975" Dia x .50" High (24.8mm Dia x 12.70mm High) Street Barrels offer the next step up in stability above the Cone shape.  The ShortStreetBarrel / StreetBarrel setup is...

Sold as Pair with Large Flat Washers & a Sticker!  Choose the Magnum shape if you're using Paris Trucks or any truck that has a slightly larger bushing seat.  The slightly larger shape will fill that seat snugly, thus eliminating the...

Sold as Pair with Sticker. Designed specifically for use in Paris Trucks as well as those that have a slightly larger bushing seat.  The slightly larger shape will fill that seat snugly, thus eliminating the chance of dead-space or...

Sold as Pair with Flat Washers and Sticker.   .975" Dia x .60" High (24.77mm Dia x 15.24mm High) FatCones have the same initial stability as a Barrel but as you lean, they offer progressively higher resistance the further you go.  The...

Sold as Pair with Sticker. .975" Dia x .60" High (24.77mm Dia x 15.24mm High) Cones offer the lowest resistance and stability of bushing shapes which can allow your trucks to easily achieve their full lean and turn. The Cone / Cone setup is for...

Krank Barrel Longboard Bushings are sold as a Pair with a sticker and No Washers are included. Bushing Height: 0.6" - Bushing Diameter: 0.98" Performance Under Pressure - The KranK Formula has quite a bit of adjustability. You can tighten the...

Sold as Pair w/Washers & a Sticker 1.10" Dia x .60" High (24.77mm Dia x 15.24mm High) WFB rides a couple of points softer than they test, so order accordingly Hard durometer bushings (95.5a - 93a) are for heavier-weight riders (over...

Sold as Pair with Large Flat Washers & a Sticker .975" Dia x .60" High (24.77mm Dia x 15.24mm High). WFB rides a couple of points softer than they test, so order accordingly Hard durometer bushings (95.5a - 93a) are for...

Sold as Pair with Sticker.  .975" Dia x .60" High (24.77mm Dia x 15.24mm High) APS rides a couple of points softer than they test, so order accordingly Hard durometer bushings (95.5a - 93a) are for heavier-weight riders (over 125lbs)...

Sold as Pair with a Sticker WFB ride a couple of points softer than they test, so order accordingly Hard durometer bushings (95.5a - 93a) are for heavier-weight riders (over 125lbs) and allow for a nice tight set-up...

WFB Barrel Longboard Bushings are sold as a Pair with a sticker and No Washers are included. Bushing Height: 0.6" - Bushing Diameter: 0.98" The WFB formula will have a white powder residue on the surface. This is a good thing...

Street FatCone skateboard bushings are sold as a PAIR with a sticker and LARGE CUP WASHERS are included:  Sized to fit properly in conventional "Indy style" trucks Custom APS Urethane Formula for ultra-performance and sweet...

Street Cone skateboard bushings are sold as a PAIR with a sticker and SMALL CUP WASHERS are included:  Sized to fit properly in conventional "Indy style" trucks Custom APS Urethane Formula for ultra-performance and sweet...

Street Chubby skateboard bushings are sold as a PAIR with a sticker and LARGE FLAT WASHERS are included:  Sized to fit properly in conventional "Indy style" trucks Custom APS Urethane Formula for ultra-performance and sweet rebound. Hard...

Street Barrel skateboard bushings are sold as a PAIR with a sticker and LARGE CUP WASHERS are included:  Sized to fit properly in conventional "Indy style" trucks Custom APS Urethane Formula for ultra-performance and sweet rebound. Hard...

Magnum skateboard bushings are sold as a PAIR with a sticker and LARGE FLAT WASHERS are included:  The APS formula rides a couple of points softer than they test, so order accordingly Hard durometer...

FatCone skateboard bushings are sold as a PAIR with a sticker and LARGE FLAT WASHERS are included:  The APS formula rides a couple of points softer than they test, so order accordingly Hard durometer bushings (95a - 97...

Cone skateboard bushings are sold as a PAIR with a sticker and NO WASHERS are included:  The APS formula rides a couple of points softer than they test, so order accordingly Hard durometer bushings...

Canon skateboard bushings are sold as a pair with a sticker and  NO WASHERS are included:  The APS formula rides a couple of points softer than they test, so order accordingly Hard durometer bushings (95a - 97.5a)...

APS Barrel Longboard Bushings are sold as a Pair with a sticker and No Washers are included. Bushing Height: 0.6" - Bushing Diameter: 0.98" The APS compound is very lively, which offers high rebound with lots of control and lean...