null

Bear - Polar Bear

Bear - Polar Bear

We recommend having normal height Longboard Bushing on board-side and Short StreetSeries Bushings on roadside.

  • Bear Polar Bear WFB 96a Pivots Cracked Ice Blue Bear Polar Bear WFB 96a Pivots Cracked Ice Blue
    Choose Options

    Bear - Polar Bear Pivot Cup

    $13.95
    Sold as a Pair with Sticker! Specifically designed for each truck Lively & Responsive Hand-poured into Custom-made molds, then the cup end is machined to fit the truck's base plate perfectly No machining imperfections and no heat-affected zone...
    $13.95
    Choose Options
  • Speed Lube
    Choose Options

    Speed Lube

    $9.80
    Developing a bearing lube for skateboards has been on our agenda for a few years as we’ve never been completely satisfied with the lubes that were available. When we got serious and started listing the qualities/performance we felt were missing, we...
    $9.80
    Choose Options
  • KranK Short Street Cone
    Choose Options

    KranK Short Street Cone

    $9.00
    Sold as Pair with Small Cupped Washers & a Sticker The ShortStreetCone / StreetCone setup is for those looking for a very carvy or surfy feel.  The ShortStreetCone / StreetBarrel setup is for those looking for a carvy or...
    $9.00
    Choose Options
  • KranK Short Street Barrel
    Choose Options

    KranK Short Street Barrel

    $9.00
    Sold as Pair with Small Flat Washers and a Sticker.  The ShortStreetBarrel / StreetBarrel setup is for those looking for higher stability at higher speeds but still highly maneuverable.  The ShortStreetBarrel /...
    $9.00
    Choose Options
  • KranK Chubby
    Choose Options

    KranK Chubby

    $11.50
    Sold as Pair with Large Flat Washers and a Sticker.   .975" Dia x .60" High (24.77mm Dia x 15.24mm High) Chubbys offer the highest stability of all the shapes we offer & work best in a truck that has a stepped bushing seat to take...
    $11.50
    Choose Options
  • KranK FatCone
    Choose Options

    KranK FatCone

    $11.50
    Sold as Pair with Flat Washers and Sticker.   .975" Dia x .60" High (24.77mm Dia x 15.24mm High) FatCones have the same initial stability as a Barrel but as you lean, they offer progressively higher resistance the further you go.  The...
    $11.50
    Choose Options
  • KranK Barrel
    Choose Options

    KranK Barrel

    $9.00
    Performance Under Pressure Sold as Pair with a Sticker .975" Dia x .60" High (24.8mm Dia x 15.24mm High) Harder KranK durometer bushings (96a & 93a) are for heavier-weight riders (over 140lbs) as harder durometer bushings allow for a nice tight...
    $9.00
    Choose Options
  • Small Cup Washers
    Choose Options

    Small Cup Washers

    $1.50
    Packaged with a Sticker - Available in Packs of 4, 8, 16 or 32 Washers A Small Plated-Steel Cupped Washer commonly used with Street & ShortStreet Cone Bushings Specs:   .390" Hole x .940" Overall Diameter, x .058" Thick  ...
    $1.50
    Choose Options
  • Large Cup Washers
    Choose Options

    Large Cup Washers

    $1.50
    Packaged with a Sticker - Available in Packs of 4, 8, 16 or 32 Washers A large Plated-Steel Cupped Washer commonly used with Street Barrel Bushings Specs:   .390" Hole x 1.12" Overall Diameter, x .058" Thick      ...
    $1.50
    Choose Options
  • Choose Options

    Small Flat Washers

    $1.50
    Packaged with a Sticker, available in Packs of 4, 8, 16 or 32 Small Stainless Steel Flat Washers commonly used with Short Street Barrel Bushings Specs:   .377" Hole x .875" Overall Diameter, x .08" Thick      ...
    $1.50
    Choose Options
  • Choose Options

    Large Flat Washers

    $1.50
    Packaged with a Sticker & Available in Packs of 4, 8, 16 & 32 Large Stainless Steel Flat Washers commonly used with Street Chubby, Street FatCone, Street Magnum, Chubby, FatCone, Magnum, Tall Chubby & Tall FatCone Bushings. Specs:...
    $1.50
    Choose Options
  • APS Short Street Cone
    Choose Options

    APS Short Street Cone

    $7.00
    Sold as Pair, with small cup washers & a sticker Sized to fit properly in conventional "Indy-style" trucks Custom APS Urethane Formula for ultra-performance and sweet rebound .975" Dia x .4" High (24.77mm Dia x 10.2mm High) Stiffer bushings...
    $7.00
    Choose Options
  • WFB FatCone
    Choose Options

    WFB FatCone

    $11.50
    Sold as Pair with Large Flat Washers & a Sticker .975" Dia x .60" High (24.77mm Dia x 15.24mm High). WFB rides a couple of points softer than they test, so order accordingly Hard durometer bushings (95.5a - 93a) are for...
    $11.50
    Choose Options
  • WFB Chubby
    Choose Options

    WFB Chubby

    $11.50
    Sold as Pair with Large Flat Washers & a Sticker .975" Dia x .60" High (24.77mm Dia x 15.24mm High) APS rides a couple of points softer than they test, so order accordingly Hard durometer bushings (95.5a - 93a) are for heavier-weight...
    $11.50
    Choose Options
  • RipTide Sports WFB Double Barrel Group RipTide Sports WFB Double Barrel 95.5a
    Choose Options

    WFB Barrel

    $9.00
    Sold as Pair with Sticker.  .975" Dia x .60" High (24.77mm Dia x 15.24mm High) WFB ride a couple of points softer than they test, so order accordingly Hard durometer bushings (95.5a - 93a) are for heavier-weight riders (over...
    $9.00
    Choose Options
  • APS Short Street Barrel
    Choose Options

    APS Short Street Barrel

    $7.00
    Sold as Pair, with small flat washers & a sticker Sized to fit properly in conventional "Indy-style" trucks Custom APS Urethane Formula for ultra-performance and sweet rebound .975" Dia x .4" High (24.77mm Dia x 10.2mm High) Hard...
    $7.00
    Choose Options
  • APS FatCone
    Choose Options

    APS FatCone

    $8.50
    FatCone skateboard bushings are sold as a PAIR with a sticker and LARGE FLAT WASHERS are included:  The APS formula rides a couple of points softer than they test, so order accordingly Hard durometer bushings (95a - 97...
    $8.50
    Choose Options
  • APS Chubby
    Choose Options

    APS Chubby

    $8.50
    Chubby skateboard bushings are sold as a PAIR with a sticker and LARGE FLAT WASHERS are included:  The APS formula rides a couple of points softer than they test, so order accordingly Hard durometer bushings (95a -...
    $8.50
    Choose Options
  • Barrel Bushing Sketch
    Choose Options

    APS Barrel

    $7.00
    Barrel skateboard bushings are sold as a PAIR with a sticker and NO WASHERS are included:  The APS formula rides a couple of points softer than they test, so order accordingly Hard durometer bushings (95a - 97.5a) are for...
    $7.00
    Choose Options