KranK Street FatCone
Sold as Pair with Large Flat Washers and Sticker.
Choose the Street FatCone when you're looking for a little higher resistance in lean than the Street Barrel will offer you! The FatCone shape will offer a little more stability in your axle suspension while leaving you in control of the return-to-center.
When combined with a ShortStreet or a Street Barrel, the setup is ideal when you need to restrict the ends of the lean to prevent wheel-bite or if you just like a more progressive feel to your setup.
.975" Dia x .50" High (24.77mm Dia x 12.70mm High)
- Harder KranK durometer bushings (93a) for heavier-weight riders (over 140lbs) as harder durometer bushings allow for a nice tight set-up
- Softer KranK durometer bushings (87a) for medium-weight riders (75 - 140lbs) as these medium-soft durometers are also for those looking for a looser setup in the RoadSide position when coupled with a harder duro bushing.
PLEASE NOTE: The KranK Formula has quite a bit of adjustability - so order accordingly! You can tighten the kingpin nut up to two full turns to 'harden' or 'loosen' the duro.
We're super friendly folks who enjoy helping you choose the bushings combo that is just right for you.