Polar Bear

Cone skateboard bushings are sold as a PAIR with a sticker and NO WASHERS are included:  The APS formula rides a couple of points softer than they test, so order accordingly Hard durometer bushings...

FatCone skateboard bushings are sold as a PAIR with a sticker and LARGE FLAT WASHERS are included:  The APS formula rides a couple of points softer than they test, so order accordingly Hard durometer bushings (95a - 97...

Sold as Pair with Sticker. Designed specifically for use in Paris Trucks as well as those that have a slightly larger bushing seat.  The slightly larger shape will fill that seat snugly, thus eliminating the chance of dead-space or...

Sold as Pair with Sticker. .975" Dia x .60" High (24.77mm Dia x 15.24mm High) Cones offer the lowest resistance and stability of bushing shapes which can allow your trucks to easily achieve their full lean and turn. The Cone / Cone setup is for...

Canon skateboard bushings are sold as a pair with a sticker and NO WASHERS are included:  The APS formula rides a couple of points softer than they test, so order accordingly Hard durometer bushings (95a - 97.5a) are for...

Sold as Pair, with small cup washers & a sticker Sized to fit properly in conventional "Indy-style" trucks Custom APS Urethane Formula for ultra-performance and sweet rebound .975" Dia x .4" High (24.77mm Dia x 10.2mm High) Stiffer bushings...

Sold as Pair with Flat Washers and Sticker.   .975" Dia x .60" High (24.77mm Dia x 15.24mm High) FatCones have the same initial stability as a Barrel but as you lean, they offer progressively higher resistance the further you go.  The...

Sold as Pair with Small Cupped Washers & a Sticker The ShortStreetCone / StreetCone setup is for those looking for a very carvy or surfy feel.  The ShortStreetCone / StreetBarrel setup is for those looking for a carvy or...

Chubby skateboard bushings are sold as a PAIR with a sticker and LARGE FLAT WASHERS are included:  The APS formula rides a couple of points softer than they test, so order accordingly Hard durometer bushings (95a -...

Sold as Pair with Large Flat Washers and a Sticker.   .975" Dia x .60" High (24.77mm Dia x 15.24mm High) Chubbys offer the highest stability of all the shapes we offer & work best in a truck that has a stepped bushing seat to take advantage...

Sold as Pair with Sticker.  .975" Dia x .60" High (24.77mm Dia x 15.24mm High) APS rides a couple of points softer than they test, so order accordingly Hard durometer bushings (95.5a - 93a) are for heavier-weight riders (over 125lbs)...

Sold as Pair with Small Flat Washers and a Sticker.  The ShortStreetBarrel / StreetBarrel setup is for those looking for higher stability at higher speeds but still highly maneuverable.  The ShortStreetBarrel /...

Sold as Pair, with small flat washers & a sticker Sized to fit properly in conventional "Indy-style" trucks Custom APS Urethane Formula for ultra-performance and sweet rebound .975" Dia x .4" High (24.77mm Dia x 10.2mm High) Hard...

Sold as Pair with a Sticker WFB ride a couple of points softer than they test, so order accordingly Hard durometer bushings (95.5a - 93a) are for heavier-weight riders (over 125lbs) and allow for a nice tight set-up...

Sold as Pair with Large Flat Washers & a Sticker .975" Dia x .60" High (24.77mm Dia x 15.24mm High). WFB rides a couple of points softer than they test, so order accordingly   Hard durometer bushings (95.5a - 93a) are for...

Sold as Pair with Large Flat Washers & a Sticker .975" Dia x .60" High (24.77mm Dia x 15.24mm High) APS rides a couple of points softer than they test, so order accordingly Hard durometer bushings (95.5a - 93a) are for heavier-weight riders...

Check out Polar Bear Recommended Products for more info on the trucks.  WFB Ace Pivot Cups are sold as a pair and fit into Polar Bear Trucks. These pivots are available in Green. Riptide's Premium WFB Pivot Cups are a perfect upgrade to your...