More
-
APS Barrel 0.6"
$8.99APS Barrel Longboard Bushings are sold as a Pair or 2 Pair with a sticker and No Washers are included. Bushing Height: 0.6" - Bushing Diameter: 0.98" The APS compound is very lively, which offers high rebound with lots of control and lean...$8.99 -
KranK Barrel 0.6"
$9.99Krank Barrel Bushings are sold as a Pair or 2 Pairs with a sticker. No Washers are included and you may buy optional washers to further customize your setup. Bushing Height: 0.6" - Bushing Diameter: 0.98" Performance Under Pressure - The KranK...$9.99 -
APS Cone 0.6"
$8.99APS Cone Longboard Bushings are sold as a Pair or 2 Pair with a sticker and No Washers are included. Bushing Height: 0.6" - Bushing Diameter: 0.98" The APS compound is very lively, which offers high rebound with lots of...$8.99 -
Carver CX SurfSkate Bushings
$8.99Sold as a pair with a sticker. For use in the front truck of Carver CX Surfskate Trucks. Also works in Grasp Trucks. Be sure to check out our pivot cups for Carver CX for a smooth and quiet ride! Short CX 0.56" - (Road-Side or 2nd Bushing) / Tall...$8.99 -
APS Tall Barrel 0.75"
$9.99Sold as Pair with Sticker. .975" Dia x .75" High (24.77mm Dia x 19mm High) APS rides a couple of points softer than they test, so order accordingly Hard durometer bushings (95a - 97.5a) are for heavier-weight riders (over 125lbs)...$9.99 -
APS FatCone 0.6"
$9.99FatCone skateboard bushings are sold as a PAIR with a sticker and LARGE FLAT WASHERS are included: The APS formula rides a couple of points softer than they test, so order accordingly Hard durometer bushings (95a - 97...$9.99 -
KranK Canon 0.6"
$9.99Sold as Pair with Sticker. Designed specifically for use in Paris Trucks as well as those that have a slightly larger bushing seat. The slightly larger shape will fill that seat snugly, thus eliminating the chance of dead-space or...$9.99 -
KranK Tall Barrel 0.75"
$10.99Sold as Pair with Sticker. .975" Dia x .75" High (24.77mm Dia x 19mm High) For use in trucks that require Tall Bushings (such as Ronin, Bear Kodiak, Arsenal) TallBarrels offer the next step up in stability above the TallCones and are often used for a...$10.99 -
APS Canon 0.6"
$8.99Canon skateboard bushings are sold as a pair with a sticker and NO WASHERS are included: The APS formula rides a couple of points softer than they test, so order accordingly Hard durometer bushings (95a - 97.5a) are for...$8.99 -
KranK Cone 0.6"
$9.99Krank Cone Bushings are sold as a Pair or 2 Pairs with a sticker. No Washers are included and you may buy optional washers to further customize your setup. Bushing Height: 0.6" - Bushing Diameter: 0.98" Performance Under Pressure - The KranK Formula...$9.99 -
KranK Street Barrel 0.5"
$9.99Sold as Pair with Large Cupped Washers and Sticker. .975" Dia x .50" High (24.8mm Dia x 12.70mm High) Street Barrels offer the next step up in stability above the Cone shape. The ShortStreetBarrel / StreetBarrel setup is...$9.99 -
APS Street Barrel 0.5"
$8.99Street Barrel skateboard bushings are sold as a PAIR with a sticker and LARGE CUP WASHERS are included: Sized to fit properly in conventional "Indy style" trucks Custom APS Urethane Formula for ultra-performance and sweet rebound. Hard...$8.99 -
WFB Barrel 0.6"
$10.99WFB Barrel Longboard Bushings are sold as a Pair with a sticker and No Washers are included. Bushing Height: 0.6" - Bushing Diameter: 0.98" The WFB formula will have a white powder residue on the surface. This is a good thing and...$10.99 -
APS Short Street Cone 0.4"
$8.99Sold as Pair, with small cup washers & a sticker Sized to fit properly in conventional "Indy-style" trucks Custom APS Urethane Formula for ultra-performance and sweet rebound .975" Dia x .4" High (24.77mm Dia x 10.2mm High) Stiffer bushings...$8.99 -
Speed Lube
$9.80Our Speed Lube for ball bearings comes in two formulas for any condition Developing a bearing lube for skateboards has been on our agenda for a few years as we’ve never been completely satisfied with the lubes that were available. When we got...$9.80 -
KranK Short Street Cone 0.4"
$9.99Sold as Pair with Small Cupped Washers & a Sticker The ShortStreetCone / StreetCone setup is for those looking for a very carvy or surfy feel. The ShortStreetCone / StreetBarrel setup is for those looking for a carvy or...$9.99 -
KranK FatCone 0.6"
$10.99Sold as Pair with Flat Washers and Sticker. .975" Dia x .60" High (24.77mm Dia x 15.24mm High) FatCones have the same initial stability as a Barrel but as you lean, they offer progressively higher resistance the further you go. The...$10.99 -
KranK Chubby 0.6"
$10.99Sold as Pair with Large Flat Washers and a Sticker. .975" Dia x .60" High (24.77mm Dia x 15.24mm High) Chubbys offer the highest stability of all the shapes we offer & work best in a truck that has a stepped bushing seat to take advantage...$10.99 -
APS Street Cone 0.5"
$8.99Street Cone skateboard bushings are sold as a PAIR with a sticker and SMALL CUP WASHERS are included: Sized to fit properly in conventional "Indy style" trucks Custom APS Urethane Formula for ultra-performance and sweet...$8.99 -
KranK Short Street Barrel 0.4"
$9.99Sold as Pair with Small Flat Washers and a Sticker. The ShortStreetBarrel / StreetBarrel setup is for those looking for higher stability at higher speeds but still highly maneuverable. The ShortStreetBarrel /...$9.99 -
APS Chubby 0.6"
$9.99Chubby skateboard bushings are sold as a PAIR with a sticker and LARGE FLAT WASHERS are included: The APS formula rides a couple of points softer than they test, so order accordingly Hard durometer bushings (95a -...$9.99 -
WFB Tall Barrel 0.75"
$11.99Sold as Pair with a Sticker .975" Dia x .75" High (24.77mm Dia x 19mm High) WFB rides a couple of points softer than they test, so order accordingly. Hard durometer bushings (95.5a - 93a) are for heavier-weight riders (over 125lbs)...$11.99 -
WFB Cone 0.6"
$10.99Sold as Pair with Sticker. .975" Dia x .60" High (24.77mm Dia x 15.24mm High) APS rides a couple of points softer than they test, so order accordingly Hard durometer bushings (95.5a - 93a) are for heavier-weight riders (over 125lbs)...$10.99 -
Large Cup Washers
$3.00Packaged with a Sticker - Available in Packs of 4, 8, 16 or 32 Washers A large Plated-Steel Cupped Washer commonly used with Street Barrel Bushings Specs: .390" Hole x 1.12" Overall Diameter, x .058" Thick ...$3.00 -
Lacroix Bushings
$19.99These bushings are designed specifically for Lacroix trucks. Made of high quality urethane in our APS formula. Sold as a pair with a sticker! Comes in our Eco-Friendly Box. Beginning in Spring of 2024 we are changing the color scheme for...$19.99 -
Thunder Pivot Cups
$13.99Sold as a Pair with Sticker! Specifically designed for each truck Lively & Responsive Hand-poured into Custom-made molds, then the cup end is machined to fit the truck's base plate perfectly No machining imperfections and no heat-affected zone...$13.99 -
KranK Street Cone 0.5"
$9.99Sold as Pair with Small Cupped Washers and a Sticker. .975" Dia x .50" High (24.77mm Dia x 12.70mm High) Street Cones offer the lowest resistance and stability of the 5 shapes we offer, and can allow your trucks to easily achieve their full...$9.99 -
Waterborne SurfSkate Adapter Front Bushing
$4.99Sold as a single with a sticker. For use in front Waterborne Surf Adapters. We also sell bushings for the rear Waterborne Rail Adapter, sold here.$4.99 -
WFB Canon 0.6"
$10.99Sold as Pair with a Sticker WFB ride a couple of points softer than they test, so order accordingly Hard durometer bushings (95.5a - 93a) are for heavier-weight riders (over 125lbs) and allow for a nice tight set-up...$10.99 -
KORE Spherical Bushings
$9.99Dimensions of the Kores: .8125" (20.63mm) OD x .373" (9.47mm) ID x .312" (7.92mm) H Sold as Pair with a Sticker. (Enough for 1 pair of Trucks) Spherical Bushings are used to replace a Con-6 Spherical Bearings in trucks that use them in the hanger,...$9.99 -
Small Flat Washers
$3.00Packaged with a Sticker, available in Packs of 4, 8, 16 or 32 Small Stainless Steel Flat Washers commonly used with Short Street Barrel Bushings Specs: .377" Hole x .875" Overall Diameter, x .08" Thick ...$3.00 -
APS Short Street Barrel 0.4"
$8.99Sold as Pair, with small flat washers & a sticker Sized to fit properly in conventional "Indy-style" trucks Custom APS Urethane Formula for ultra-performance and sweet rebound .975" Dia x .4" High (24.77mm Dia x 10.2mm High) Hard...$8.99 -
Krank Short Street Cone & Street Barrel - 4 Pack
MSRP: $19.99$18.99The Krank Short Street Cone & Street Barrel 4 Pack Skateboard Bushings are sold in 2 Pairs with a sticker and 2 Small Cup Washers & 2 Large Cup Washers are included. Sized to fit properly in conventional...MSRP: $19.99$18.99 -
Black (R Riptide S) Stickers
$0.10Additional RipTide Stickers to add to your collection! Let us know if you would like to receive some red PSD Stickers as well at No Charge. Thank You for spreading the stoke - we appreciate your help in getting the word out about our brand and can only...$0.10 -
KranK Tall Chubby 0.75"
$11.99Sold as Pair with Large Flat Washers and Sticker. .975" Dia x .75" High (24.77mm Dia x 20mm High) TallChubbys offer the highest stability of all the shapes discussed here and work best in a truck that has a stepped bushing seat to take...$11.99 -
KranK Tall FatCone 0.75"
$11.99Sold as Pair with Flat Washers and Sticker. .975" Dia x .75" High (24.77mm Dia x 20mm High) TallFatCones have the same initial stability as a TallBarrel but as you lean, they offer progressively higher resistance the further you go. The...$11.99 -
APS Tall FatCone 0.75"
$10.99Sold as Pair with Large Flat Washers & a Sticker .975" Dia x .75" High (24.77mm Dia x 20mm High). Custom urethane blend. APS rides a couple of points softer than they test, so order accordingly Hard durometer bushings (95a - 97.5a) are...$10.99 -
Large Flat Washers
$3.00Packaged with a Sticker & Available in Packs of 4, 8, 16 & 32 Large Stainless Steel Flat Washers commonly used with Street Chubby, Street FatCone, Street Magnum, Chubby, FatCone, Magnum, Tall Chubby & Tall FatCone Bushings. Specs:...$3.00 -
APS Short Street Cone & Street Barrel - 4 Pack
MSRP: $17.99$16.99Sold in a set of 4, with small cup washers & a sticker. Short Street Cone: Sized to fit properly in conventional "Indy-style" trucks Custom APS Urethane Formula for ultra-performance and sweet rebound .975" Dia x .4" High (24.77mm Dia x 10.2mm...MSRP: $17.99$16.99 -
Backing Frames #102
$24.99Sold as a Pair Configured to conform to the following trucks:BearCindrichCoreGull Wing Bomber, Charger & StalkerHoleyIndeeszIndyMagnumMagunParisRandal II - 42' & 50'Randal Comp & DH - 28', 50' &...$24.99 -
WFB FatCone 0.6"
$11.99Sold as Pair with Large Flat Washers & a Sticker .975" Dia x .60" High (24.77mm Dia x 15.24mm High). WFB rides a couple of points softer than they test, so order accordingly Hard durometer bushings (95.5a - 93a) are for...$11.99 -
Backing Frames #105
$24.99Sold as 4 Pieces Configured to conform to the following trucks: BearCindrichCoreGull Wing Bomber, Charger & StalkerHoleyIndeeszIndyMagnumMagunParisRandal II - 42' & 50'Randal Comp & DH - 28', 50' &...$24.99 -
KranK Street FatCone 0.5"
$10.99Sold as Pair with Large Flat Washers and Sticker. Choose the Street FatCone when you're looking for a little higher resistance in lean than the Street Barrel will offer you! The FatCone shape will offer a little more stability in your axle...$10.99 -
APS Tall Cone 0.75"
$9.99Sold as Pair with Sticker. .975" Dia x .75" High (24.77mm Dia x 19mm High) APS rides a couple of points softer than they test, so order accordingly Hard durometer bushings (95a - 97.5a) are for heavier-weight riders (over 125lbs)...$9.99 -
WFB Chubby 0.6"
$11.99Sold as Pair with Large Flat Washers & a Sticker .975" Dia x .60" High (24.77mm Dia x 15.24mm High) APS rides a couple of points softer than they test, so order accordingly Hard durometer bushings (95.5a - 93a) are for heavier-weight riders...$11.99 -
Small Cup Washers
$3.00Packaged with a Sticker - Available in Packs of 4, 8, 16 or 32 Washers A Small Plated-Steel Cupped Washer commonly used with Street & ShortStreet Cone Bushings Specs: .390" Hole x .940" Overall Diameter, x .058" Thick ...$3.00 -
KranK Street Chubby 0.5"
$10.99Sold as Pair with Large Flat Washers and a Sticker. The Street Chubby provides a more stable platform when combined with either a Barrel or a Cone shaped Bushing. If you're looking for more control while learning, or are simply looking...$10.99 -
Venture Pivot Cups
$13.99Sold as a Pair with Sticker! Specifically designed for each truck Lively & Responsive Hand-poured into Custom-made molds, then the cup end is machined to fit the truck's base plate perfectly No machining imperfections and no heat-affected zone...$13.99 -
Backing Frames #104
$24.99Sold as a Pair Configured to conform to the following trucks: BearCindrichCoreGull Wing Bomber, Charger & StalkerHoleyIndeeszIndyMagnumMagunParisRandal II - 42' & 50'Randal Comp & DH - 28', 50' & 60'SabreSayshunStealthSurf-RodzTrackerSold...$24.99 -
APS Tall Chubby 0.75"
$10.99Sold as Pair with Large Flat Washers & a Sticker .975" Dia x .75" High (24.77mm Dia x 20mm High). Custom urethane blend. APS rides a couple of points softer than they test, so order accordingly Hard durometer bushings (95a - 97.5a) are...$10.99 -
Krank Short Street Cone & Street Cone - 4 Pack
MSRP: $19.99$18.99The Krank Short Street Cone & Street Cone 4 Pack Skateboard Bushings are sold in 2 Pairs with a sticker and 4 Small Cup Washers are included. Sized to fit properly in conventional "Indy-style" trucks. Bushing Height: 0.4"...MSRP: $19.99$18.99 -
APS Street FatCone 0.5"
$9.99Street FatCone skateboard bushings are sold as a PAIR with a sticker and LARGE CUP WASHERS are included: Sized to fit properly in conventional "Indy style" trucks Custom APS Urethane Formula for ultra-performance and sweet...$9.99 -
Aera K3, K4 Pivot Tubes
$12.99Check out Aera K3 & K4 Recommended Products for more info on the trucks. WFB Pivot Cups are sold as a pair and fit into Aera K3 & K4 Trucks. These pivots are available in Green. Riptide's Premium WFB pivot cups are a perfect upgrade to...$12.99 -
Tracker RTS & Dart Pivot Cups
$13.99Sold as a Pair with Sticker! Specifically designed for each truck Lively & Responsive Hand-poured into Custom-made molds, then the cup end is machined to fit the truck's base plate perfectly No machining imperfections and no heat-affected zone...$13.99 -
APS Street Chubby 0.5"
$9.99Street Chubby skateboard bushings are sold as a PAIR with a sticker and LARGE FLAT WASHERS are included: Sized to fit properly in conventional "Indy style" trucks Custom APS Urethane Formula for ultra-performance and sweet rebound. Hard...$9.99 -
WFB Tall Chubby 0.75"
$12.99Sold as Pair with Large Flat Washers & a Sticker .975" Dia x .75" High (24.77mm Dia x 20mm High). Custom urethane blend. WFB rides a couple of points softer than they test, so order accordingly Hard durometer bushings (95.5a - 93a) are for...$12.99 -
KranK Tall Cone 0.75"
$10.99Sold as Pair with a Sticker .975" Dia x .75" High (24.77mm Dia x 20mm High). KranK rides a couple of points softer than they test, so order accordingly. Harder KranK durometer bushings (93a) are for heavier-weight riders (over 140lbs) as...$10.99 -
APS Short Street Cone & Street Cone - 4 Pack
MSRP: $17.99$16.99Sold in a set of 4, with small cup washers & a sticker Short Street Cone: Sized to fit properly in conventional "Indy-style" trucks Custom APS Urethane Formula for ultra-performance and sweet rebound .975" Dia x .4" High (24.77mm Dia x 10.2mm...MSRP: $17.99$16.99 -
Carver C7 SurfSkate Front Arm Bushings
$8.99Sold as a pair with a sticker and a small cup washer. For use in the front truck of Carver C7 Surfskate Trucks. Be sure to check out our pivot cups for Carver C7 for a smooth and quiet ride! Short Street 0.4"" - (Road-Side or 2nd Bushing) / Street 0...$8.99 -
Aera K5 Pivot Cups
$13.99Check out Aera K5 Recommended Products for more info on the trucks. WFB Ace Pivot Cups are sold as a pair and fit into Aera K5 Trucks. These pivots are available in Green. Riptide's Premium WFB Pivot Cups are a perfect upgrade to your trucks...$13.99 -
Tensor - Aluminum, Mag Light & Magnesium Pivot Cups
$13.99Sold as a Pair with Sticker! Specifically designed for each truck Lively & Responsive Hand-poured into Custom-made molds, then the cup end is machined to fit the truck's base plate perfectly No machining imperfections and no heat-affected zone...$13.99 -
WFB Tall FatCone 0.75"
$12.99Sold as Pair with Large Flat Washers & a Sticker .975" Dia x .75" High (24.77mm Dia x 20mm High). Custom urethane blend. WFB rides a couple of points softer than they test, so order accordingly Hard durometer bushings (95.5a - 93a) are for...$12.99 -
Surf-Rodz Pivot Cups
$13.99Sold as a Pair with Sticker! Specifically designed for each truck Lively & Responsive Hand-poured into Custom-made molds, then the cup end is machined to fit the truck's base plate perfectly No machining imperfections and no heat-affected zone...$13.99 -
Bennett Pivot Cups
$13.99Check out Bennett Recommended Products for more info on the trucks. WFB Ace Pivot Cups are sold as a pair and fit into Bennett Trucks. These pivots are available in Green. Riptide's Premium WFB Pivot Cups are a perfect upgrade to your trucks...$13.99 -
Ronin Pivot Tubes
$12.99Sold as a Pair with Sticker! Specifically designed for each truck Lively & Responsive Hand-poured into Custom-made molds, then the cup end is machined to fit the truck's base plate perfectly No machining imperfections and no heat-affected zone...$12.99 -
$19.99
-
WFB Tall Cone 0.75"
$11.99Sold as Pair with a Sticker .975" Dia x .75" High (24.77mm Dia x 20mm High). Custom urethane blend.APS rides a couple of points softer than they test, so order accordingly Hard durometer bushings (95.5a - 93a) are for heavier-weight...$11.99 -
APS Cube 0.6"
$9.99Cube skateboard bushings are sold as a PAIR with a sticker and large flat washers are included: The Cube Bushing Seat can be found in Rey Trucks and are mostly used as standard in G-Bomb Torsion Tails where the Cube Bushings provide axle...$9.99 -
Custom Height, Duro & Shape Combo Pack
$58.00This pack is designed for riders who want to dial in their setup at a discounted price. Select your correct bushing height and then choose your duro / shape combo to create the perfect setup. This pack includes 3 different durometers with 4...$58.00 -
Zealous Downhill Slalom Pivot Cups
$13.99Specifically designed for Zealous Downhill Slalom Trucks Lively & Responsive Hand-poured into Custom-made molds, then the cup end is machined to fit the truck's base plate perfectly No machining imperfections and no heat-affected zone in the...$13.99 -
Arsenal Cast Pivot Cups
$13.99Check out Arsenal Cast Recommended Products for more info on the trucks. WFB Ace Pivot Cups are sold as a pair and fit into Arsenal Cast Trucks. These pivots are available in Green. Riptide's Premium WFB Pivot Cups are a perfect upgrade to...$13.99 -
Aera RF-1 Pivot Cups
$13.99Check out Aera RF1 Recommended Products for more info on the trucks. WFB Ace Pivot Cups are sold as a pair and fit intoAera RF-1 Trucks. These pivots are available in Green. Riptide's Premium WFB Pivot Cups are a perfect upgrade to your trucks...$13.99 -
Rogue Cast Pivot Cups
$13.99Sold as a Pair with Sticker! Specifically designed for each truck Lively & Responsive Hand-poured into Custom-made molds, then the cup end is machined to fit the truck's base plate perfectly No machining imperfections and no heat-affected zone...$13.99 -
Atlas Trucks Pivot Cups
$13.99Check out Atlas Recommended Products for more info on the trucks. These do not fit into the Exway Atlas E-Skate trucks! WFB Ace Pivot Cups are sold as a pair and fit into Atlas Trucks. These pivots are available in Green. Riptide's Premium WFB Pivot Cups...$13.99 -
PNL Pivot Cups
$13.99Sold as a Pair with Sticker! Specifically designed for each truck Lively & Responsive Hand-poured into Custom-made molds, then the cup end is machined to fit the truck's base plate perfectly No machining imperfections and no heat-affected zone...$13.99 -
Backfire Zealot S Pivot Cups
$13.99Our WFB Backfire Zealot S Pivot Cups are sold as a pair and fit into the Zealot S Electric Skateboard. These pivots are available in Green. Riptide's Premium WFB pivot cups are a perfect upgrade to your trucks. RipTide Pivots are specifically designed...$13.99 -
Valkyrie Voxter Pivot Tubes
$15.49Sold as a Pair with Sticker! Specifically designed for each truck Lively & Responsive Hand-poured into Custom-made molds, then the cup end is machined to fit the truck's base plate perfectly No machining imperfections and no heat-affected zone...$15.49 -
Mini Logo Pivot Cups
$13.99Check out Mini Logo Recommended Products for more info on the trucks. These WFB Pivot Cups are sold as a pair and fit into Mini Logo Trucks and are available in Green. Riptide's Premium WFB Pivot Cups are a perfect upgrade to your trucks. RipTide...$13.99 -
Boosted Pivot Cups
$13.99Check out Boosted Recommended Products for more info on the trucks. WFB Ace Pivot Cups are sold as a pair and fit into Boosted Trucks. These pivots are available in Green. Riptide's Premium WFB Pivot Cups are a perfect upgrade to your trucks...$13.99 -
KranK Cube 0.6"
$10.99Sold as Pair with Large Flat Washers & a Sticker The Cube Bushing Seat can be found in Rey Trucks and are mostly used as standard in G-Bomb Torsion Tails where the Cube Bushings provide axle suspension that isolates the deck & rider from...$10.99 -
RipTide Sports Logo Decal
$3.99RipTide Logo Cutout Decal Sticker 9.5 in width 3 in Height Comes in black or white!$3.99 -
Gunmetal Cast Pivot Cups
$13.99Check out Gunmetal Cast Recommended Products for more info on the trucks. These WFB Pivot Cups are sold as a pair and fit intoGunmetal Cast Trucks and are available in Green. Riptide's Premium WFB Pivot Cups are a perfect upgrade to your trucks...$13.99 -
Skoa Pivot Cups
$13.99Sold as a Pair with Sticker! Specifically designed for each truck Lively & Responsive Hand-poured into Custom-made molds, then the cup end is machined to fit the truck's base plate perfectly No machining imperfections and no heat-affected zone...$13.99 -
Trist Pivot Cups
$13.99Sold as a Pair with Sticker! Specifically designed for each truck Lively & Responsive Hand-poured into Custom-made molds, then the cup end is machined to fit the truck's base plate perfectly No machining imperfections and no heat-affected zone...$13.99 -
Tie-Dye Logo T-Shirt
$27.99RipTide Team Riders Lyde Begue & Connor Ferguson! 100% CottonLogo Front & BackComfortable & Stylish A true tie-dye shirt - each one is unique!$27.99 -
International Sticker Request
$2.00Sticker Package includes 12 RipTide Sports Stickers and 2 PSD Stickers. You pay for the postage - we'll pay for the stickers! Thank you for not only sharing the costs with us, but Thank You for spreading the stoke - we appreciate your help in...$2.00 -
Theeve Pivot Cups
$13.99Sold as a Pair with Sticker! Specifically designed for each truck Lively & Responsive Hand-poured into Custom-made molds, then the cup end is machined to fit the truck's base plate perfectly No machining imperfections and no heat-affected zone...$13.99 -
Rey Pivot Cups
$13.99Sold as a Pair with Sticker! Specifically designed for each truck Lively & Responsive Hand-poured into Custom-made molds, then the cup end is machined to fit the truck's base plate perfectly No machining imperfections and no heat-affected zone...$13.99 -
TorqueBoards Precision & 218's
$13.95Sold as a Pair with Sticker! Specifically designed for each truck Lively & Responsive Hand-poured into Custom-made molds, then the cup end is machined to fit the truck's base plate perfectly No machining imperfections and no heat-affected zone...$13.95 -
Avenue Street Pivot Cups
$13.99Check out Avenue Street Recommended Products for more info on the trucks. WFB Ace Pivot Cups are sold as a pair and fit into Avenue Street Trucks. These pivots are available in Green. Riptide's Premium WFB Pivot Cups are a perfect upgrade to your...$13.99 -
Tracker RTX Pivot Cups
$13.99Sold as a Pair with Sticker! Specifically designed for each truck Lively & Responsive Hand-poured into Custom-made molds, then the cup end is machined to fit the truck's base plate perfectly No machining imperfections and no heat-affected zone...$13.99 -
Hoodies - Black RipTide Logo
$59.99Black Hoodie With Small Logo on front and a Larger Logo across the lower back.$59.99 -
WFB Cube 0.6"
$11.99Sold as Pair with Large Flat Washers & a Sticker .894" Sq x .60" High (22.7mm Dia x 15.24mm High) RipTide recommends the use of the harder durometer cube bushings (95.5a) for heavier-weight riders (over 150lbs) as harder durometer bushings...$11.99 -
Buzzed Pivot Tubes
$12.99Check out Buzzed Recommended Products for more info on the trucks. These WFB Pivot Cups are sold as a pair and fit intoBuzzed Trucks and are available in Green. Riptide's Premium WFB Pivot Cups are a perfect upgrade to your trucks. RipTide Pivots...$12.99 -
$24.99
-
Silver Pivot Cups
$13.99Sold as a Pair with Sticker! Specifically designed for each truck Lively & Responsive Hand-poured into Custom-made molds, then the cup end is machined to fit the truck's base plate perfectly No machining imperfections and no heat-affected zone...$13.99 -
Crail - Speed Pivot Cups
$13.99Check out Crail Speed Recommended Products for more info on the trucks. These WFB Pivot Cups are sold as a pair and fit into Crail Speed Trucks and are available in Green. Riptide's Premium WFB Pivot Cups are a perfect upgrade to your trucks...$13.99 -
Arsenal Precision Pivot Cups
$13.99Check out Arsenal Precision Recommended Products for more info on the trucks. WFB Ace Pivot Cups are sold as a pair and fit into Arsenal Precision Trucks. These pivots are available in Green. Riptide's Premium WFB Pivot Cups are a perfect upgrade...$13.99 -
Seismic Aeon Pivot Cups
$13.99Sold as a Pair with Sticker! Specifically designed for each truck Lively & Responsive Hand-poured into Custom-made molds, then the cup end is machined to fit the truck's base plate perfectly No machining imperfections and no heat-affected zone...$13.99 -
Alsen Pivot Cups
$13.99Check out Alsen Recommended Products for more info on the trucks. WFB Ace Pivot Cups are sold as a pair and fit into Alsen Trucks. These pivots are available in Green. Riptide's Premium WFB Pivot Cups are a perfect upgrade to your trucks. RipTide...$13.99