Alternate Bushings

Alternate Bushings

The bushings on this page are specially designed for specific trucks, or as less common replacement parts. 

  • Carver CX SurfSkate Bushings Carver CX SurfSkate Bushings
    Choose Options

    Carver CX SurfSkate Bushings

    $8.99
    Sold as a pair with a sticker. For use in the front truck of Carver CX Surfskate Trucks. Be sure to check out our pivot cups for Carver CX for a smooth and quiet ride! Short CX 0.56" - (Road-Side or 2nd Bushing) / Tall CX 0.65" - (Board-Side or 1st...
    $8.99
    Choose Options
  • RipTide Kore Spherical Bushings
Sold as Pair with Sticker RipTide Kore Spherical Bushings
Sold as Pair with Sticker
    Choose Options

    KORE Spherical Bushings

    $9.99
    Dimensions of the Kores: .8125" (20.63mm) OD x .373" (9.47mm) ID x .375" (9.53mm) H Sold as Pair with a Sticker.  (Enough for 1 pair of Trucks) Spherical Bushings are used to replace a Con-6 Spherical Bearings in trucks that use them in the hanger,...
    $9.99
    Choose Options
  • Lacroix Bushings
    Choose Options

    Lacroix Bushings

    $19.99
    These bushings are designed specifically for Lacroix trucks. Made of high quality urethane in our APS formula.  Sold as a pair with a sticker! Comes in our Eco-Friendly Box.  Beginning in Spring of 2024 we are changing the color scheme for...
    $19.99
    Choose Options
  • Waterborne SurfSkate Adapter Front Bushing Waterborne SurfSkate Adapter Front Bushing
    Choose Options

    Waterborne SurfSkate Adapter Front Bushing

    $4.99
    Sold as a single with a sticker. For use in front Waterborne Surf Adapters. We also sell bushings for the rear Waterborne Rail Adapter, sold here. 
    $4.99
    Choose Options
  • RipTide Sports APS Cube Bushings - Sold as Pair w/sticker & large flat washers APS Cube
    Choose Options

    APS Cube

    $9.99
    Cube skateboard bushings are sold as a PAIR with a sticker and NO WASHERS are included:  The APS formula rides a couple of points softer than they test, so order accordingly Hard durometer bushings...
    $9.99
    Choose Options
  • KranK 93a Cube Bushings - Sold with large flat washers & a sticker Krank 883a Cube Bushings - Sold with large flat washers & a sticker
    Choose Options

    KranK Cube

    $10.99
    Sold as Pair with Large Flat Washers & a Sticker The Cube Bushing Seat can be found in Rey Trucks and are mostly used as standard in G-Bomb Torsion Tails where the Cube Bushings provide axle suspension that isolates the deck & rider from...
    $10.99
    Choose Options
  • Custom Height, Duro & Shape Combo Pack
    Choose Options

    Custom Height, Duro & Shape Combo Pack

    $58.00
    This pack is designed for riders who want to dial in their setup at a discounted price. Select your correct bushing height and then choose your duro / shape combo to create the perfect setup.  This pack includes 3 different durometers with 4...
    $58.00
    Choose Options
  • RipTide Sports WFB Cube Bushings 93a Sold as Pair w/sticker & washers RipTide Sports WFB Cube Bushings 88a Sold as Pair w/sticker & washers
    Choose Options

    WFB Cube

    $11.99
    Sold as Pair with Large Flat Washers & a Sticker .894" Sq x .60" High (22.7mm Dia x 15.24mm High) RipTide recommends the use of the harder durometer cube bushings (95.5a) for heavier-weight riders (over 150lbs) as harder durometer bushings...
    $11.99
    Choose Options
  • Carver C7 SurfSkate Front Arm Bushings
    Choose Options

    Carver C7 SurfSkate Front Arm Bushings

    $8.99
    Sold as a pair with a sticker and a small cup washer. For use in the front truck of Carver C7 Surfskate Trucks. Be sure to check out our pivot cups for Carver C7 for a smooth and quiet ride! Short Street 0.4"" - (Road-Side or 2nd Bushing) / Street 0...
    $8.99
    Choose Options